D20 - Fully processed standard grades
To supply the required level of traction for this huge mining truck, four electrical motors are needed: one for each wheel.
Download
Available grades:
Thickness 0.35 mm
Thickness 0.50 mm
Thickness 0.65 mm
Thickness 1.00 mm
Properties
Non-oriented fully processed electrical steels have guaranteed magnetic properties, in accordance with (or exceeding the levels required by) EN 10106:2015. As well as the maximum loss and minimum polarisation levels cited, full magnetic characterisation curves regarding losses, polarisation, permeability and apparent power at different frequencies are available on request.
Advantages
A full range of these standard grades is available so that a steel grade can be selected according to the specific requirements of each application, from low alloy grades offering the advantage of excellent magnetic permeability, thermal conductivity and punchability to alloyed grades offering the advantage of very low losses, even at higher frequencies. A wide range of coatings is available, allowing further enhancement of punchability, reduction of interlaminar losses and improvement of corrosion protection.
Applications
Fully processed steels are designed for the manufacture of magnetic circuits for motors, transformers and other electrical equipment. The principal applications are in the electrical engineering, domestic appliance, automotive and building industries. Low loss fully processed steels are also suitable for shielding applications at low frequencies (e.g. housings around electrical systems).
Recommendations for use
The above properties are obtained without heat treatment after stamping. The material as supplied possesses all the required magnetic properties.
Brand correspondence
Thickness 0.35 mm
Full table
| |
EN 10106:2015 |
Former standard AISI |
ASTM A677:2012 |
JIS C 2552:2014 |
IEC/CEI 60404-8-4:2013 |
Old brand names |
| M 210-35 A |
M210-35A |
|
|
35A210 |
M210-35A 5 |
|
| M 230-35 A AM FCE |
|
|
|
35A230 |
|
|
| M 235-35 A |
M235-35A |
|
|
|
M235-35A 5 |
|
| M 250-35 A |
M250-35A |
M15 |
36F145 |
35A250 |
M250-35A 5 |
|
| M 270-35 A |
M270-35A |
M19 |
36F155 |
35A270 |
M270-35A 5 |
|
| M 300-35 A |
M300-35A |
M22 |
36F165 |
35A300 |
M300-35A 5 |
|
| M 330-35 A |
M330-35A |
M36 |
36F185 |
|
M330-35A 5 |
|
M 210-35 A
| |
M 210-35 A |
| EN 10106:2015 |
M210-35A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
35A210 |
| IEC/CEI 60404-8-4:2013 |
M210-35A 5 |
M 230-35 A AM FCE
| |
M 230-35 A AM FCE |
| EN 10106:2015 |
|
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
35A230 |
| IEC/CEI 60404-8-4:2013 |
|
M 235-35 A
| |
M 235-35 A |
| EN 10106:2015 |
M235-35A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M235-35A 5 |
M 250-35 A
| |
M 250-35 A |
| EN 10106:2015 |
M250-35A |
| Former standard AISI |
M15 |
| ASTM A677:2012 |
36F145 |
| JIS C 2552:2014 |
35A250 |
| IEC/CEI 60404-8-4:2013 |
M250-35A 5 |
M 270-35 A
| |
M 270-35 A |
| EN 10106:2015 |
M270-35A |
| Former standard AISI |
M19 |
| ASTM A677:2012 |
36F155 |
| JIS C 2552:2014 |
35A270 |
| IEC/CEI 60404-8-4:2013 |
M270-35A 5 |
M 300-35 A
| |
M 300-35 A |
| EN 10106:2015 |
M300-35A |
| Former standard AISI |
M22 |
| ASTM A677:2012 |
36F165 |
| JIS C 2552:2014 |
35A300 |
| IEC/CEI 60404-8-4:2013 |
M300-35A 5 |
M 330-35 A
| |
M 330-35 A |
| EN 10106:2015 |
M330-35A |
| Former standard AISI |
M36 |
| ASTM A677:2012 |
36F185 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M330-35A 5 |
Prev grade
Next grade
Thickness 0.50 mm
Full table
| |
EN 10106:2015 |
Former standard AISI |
ASTM A677:2012 |
JIS C 2552:2014 |
IEC/CEI 60404-8-4:2013 |
Old brand names |
| M 230-50 A |
M230-50A |
|
|
50A230 |
M230-50A 5 |
|
| M 250-50 A |
M250-50A |
|
|
50A250 |
M250-50A 5 |
|
| M 270-50 A |
M270-50A |
|
|
50A270 |
M270-50A 5 |
|
| M 290-50 A |
M290-50A |
M19 |
47F165 |
50A290 |
M290-50A 5 |
|
| M 310-50 A |
M310-50A |
M22 |
47F180 |
50A310 |
M310-50A 5 |
|
| M 330-50 A |
M330-50A |
M27 |
47F190 |
|
M330-50A 5 |
|
| M 350-50 A |
M350-50A |
M36 |
47F200 |
50A350 |
M350-50A 5 |
|
| M 400-50 A |
M400-50A |
M43 |
47F210 |
50A400 |
M400-50A 5 |
|
| M 470-50 A |
M470-50A |
M45 |
47F240 |
50A470 |
M470-50A 5 |
|
| M 530-50 A |
M530-50A |
M47 |
47F280 |
|
M530-50A 5 |
|
| M 600-50 A |
M600-50A |
|
|
50A600 |
M600-50A 5 |
|
| M 700-50 A |
M700-50A |
|
47F400 |
50A700 |
M700-50A 5 |
|
| M 800-50 A |
M800-50A |
|
47F450 |
50A800 |
M800-50A 5 |
|
| M 940-50 A |
M940-50A |
|
|
|
M940-50A 5 |
|
M 230-50 A
| |
M 230-50 A |
| EN 10106:2015 |
M230-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
50A230 |
| IEC/CEI 60404-8-4:2013 |
M230-50A 5 |
M 250-50 A
| |
M 250-50 A |
| EN 10106:2015 |
M250-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
50A250 |
| IEC/CEI 60404-8-4:2013 |
M250-50A 5 |
M 270-50 A
| |
M 270-50 A |
| EN 10106:2015 |
M270-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
50A270 |
| IEC/CEI 60404-8-4:2013 |
M270-50A 5 |
M 290-50 A
| |
M 290-50 A |
| EN 10106:2015 |
M290-50A |
| Former standard AISI |
M19 |
| ASTM A677:2012 |
47F165 |
| JIS C 2552:2014 |
50A290 |
| IEC/CEI 60404-8-4:2013 |
M290-50A 5 |
M 310-50 A
| |
M 310-50 A |
| EN 10106:2015 |
M310-50A |
| Former standard AISI |
M22 |
| ASTM A677:2012 |
47F180 |
| JIS C 2552:2014 |
50A310 |
| IEC/CEI 60404-8-4:2013 |
M310-50A 5 |
M 330-50 A
| |
M 330-50 A |
| EN 10106:2015 |
M330-50A |
| Former standard AISI |
M27 |
| ASTM A677:2012 |
47F190 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M330-50A 5 |
M 350-50 A
| |
M 350-50 A |
| EN 10106:2015 |
M350-50A |
| Former standard AISI |
M36 |
| ASTM A677:2012 |
47F200 |
| JIS C 2552:2014 |
50A350 |
| IEC/CEI 60404-8-4:2013 |
M350-50A 5 |
M 400-50 A
| |
M 400-50 A |
| EN 10106:2015 |
M400-50A |
| Former standard AISI |
M43 |
| ASTM A677:2012 |
47F210 |
| JIS C 2552:2014 |
50A400 |
| IEC/CEI 60404-8-4:2013 |
M400-50A 5 |
M 470-50 A
| |
M 470-50 A |
| EN 10106:2015 |
M470-50A |
| Former standard AISI |
M45 |
| ASTM A677:2012 |
47F240 |
| JIS C 2552:2014 |
50A470 |
| IEC/CEI 60404-8-4:2013 |
M470-50A 5 |
M 530-50 A
| |
M 530-50 A |
| EN 10106:2015 |
M530-50A |
| Former standard AISI |
M47 |
| ASTM A677:2012 |
47F280 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M530-50A 5 |
M 600-50 A
| |
M 600-50 A |
| EN 10106:2015 |
M600-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
50A600 |
| IEC/CEI 60404-8-4:2013 |
M600-50A 5 |
M 700-50 A
| |
M 700-50 A |
| EN 10106:2015 |
M700-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
47F400 |
| JIS C 2552:2014 |
50A700 |
| IEC/CEI 60404-8-4:2013 |
M700-50A 5 |
M 800-50 A
| |
M 800-50 A |
| EN 10106:2015 |
M800-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
47F450 |
| JIS C 2552:2014 |
50A800 |
| IEC/CEI 60404-8-4:2013 |
M800-50A 5 |
M 940-50 A
| |
M 940-50 A |
| EN 10106:2015 |
M940-50A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M940-50A 5 |
Prev grade
Next grade
Thickness 0.65 mm
Full table
| |
EN 10106:2015 |
Former standard AISI |
ASTM A677:2012 |
JIS C 2552:2014 |
IEC/CEI 60404-8-4:2013 |
Old brand names |
| M 290-65 A AM FCE |
|
|
|
|
|
|
| M 310-65 A |
M310-65A |
|
|
|
M310-65A 5 |
|
| M 330-65 A |
M330-65A |
M19 |
64F200 |
|
M330-65A 5 |
|
| M 350-65 A |
M350-65A |
M22 |
64F210 |
|
M350-65A 5 |
|
| M 400-65 A |
M400-65A |
M36 |
64F235 |
|
M400-65A 5 |
|
| M 470-65 A |
M470-65A |
M43 |
64F250 |
|
M470-65A 5 |
|
| M 530-65 A |
M530-65A |
M45 |
64F275 |
|
M530-65A 5 |
|
| M 600-65 A |
M600-65A |
M47 |
64F320 |
|
M600-65A 5 |
|
| M 700-65 A |
M700-65A |
|
|
|
M700-65A 5 |
|
| M 800-65 A |
M800-65A |
|
|
65A800 |
M800-65A 5 |
|
| M 1000-65 A |
M1000-65A |
|
|
65A1000 |
M1000-65A 5 |
|
M 290-65 A AM FCE
| |
M 290-65 A AM FCE |
| EN 10106:2015 |
|
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
|
M 310-65 A
| |
M 310-65 A |
| EN 10106:2015 |
M310-65A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M310-65A 5 |
M 330-65 A
| |
M 330-65 A |
| EN 10106:2015 |
M330-65A |
| Former standard AISI |
M19 |
| ASTM A677:2012 |
64F200 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M330-65A 5 |
M 350-65 A
| |
M 350-65 A |
| EN 10106:2015 |
M350-65A |
| Former standard AISI |
M22 |
| ASTM A677:2012 |
64F210 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M350-65A 5 |
M 400-65 A
| |
M 400-65 A |
| EN 10106:2015 |
M400-65A |
| Former standard AISI |
M36 |
| ASTM A677:2012 |
64F235 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M400-65A 5 |
M 470-65 A
| |
M 470-65 A |
| EN 10106:2015 |
M470-65A |
| Former standard AISI |
M43 |
| ASTM A677:2012 |
64F250 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M470-65A 5 |
M 530-65 A
| |
M 530-65 A |
| EN 10106:2015 |
M530-65A |
| Former standard AISI |
M45 |
| ASTM A677:2012 |
64F275 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M530-65A 5 |
M 600-65 A
| |
M 600-65 A |
| EN 10106:2015 |
M600-65A |
| Former standard AISI |
M47 |
| ASTM A677:2012 |
64F320 |
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M600-65A 5 |
M 700-65 A
| |
M 700-65 A |
| EN 10106:2015 |
M700-65A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M700-65A 5 |
M 800-65 A
| |
M 800-65 A |
| EN 10106:2015 |
M800-65A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
65A800 |
| IEC/CEI 60404-8-4:2013 |
M800-65A 5 |
M 1000-65 A
| |
M 1000-65 A |
| EN 10106:2015 |
M1000-65A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
65A1000 |
| IEC/CEI 60404-8-4:2013 |
M1000-65A 5 |
Prev grade
Next grade
Thickness 1.00 mm
Full table
| |
EN 10106:2015 |
Former standard AISI |
ASTM A677:2012 |
JIS C 2552:2014 |
IEC/CEI 60404-8-4:2013 |
Old brand names |
| M 600-100 A |
M600-100A |
|
|
|
M600-100A 5 |
|
| M 700-100 A |
M700-100A |
|
|
|
M700-100A 5 |
|
| M 800-100 A |
M800-100A |
|
|
|
M800-100A 5 |
|
| M 900-100 A AM FCE |
|
|
|
|
|
|
| M 1000-100 A |
M1000-100A |
|
|
|
M1000-100A 5 |
|
| M 1300-100 A * |
M1300-100A |
|
|
|
M1300-100A 5 |
|
M 600-100 A
| |
M 600-100 A |
| EN 10106:2015 |
M600-100A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M600-100A 5 |
M 700-100 A
| |
M 700-100 A |
| EN 10106:2015 |
M700-100A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M700-100A 5 |
M 800-100 A
| |
M 800-100 A |
| EN 10106:2015 |
M800-100A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M800-100A 5 |
M 900-100 A AM FCE
| |
M 900-100 A AM FCE |
| EN 10106:2015 |
|
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
|
M 1000-100 A
| |
M 1000-100 A |
| EN 10106:2015 |
M1000-100A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M1000-100A 5 |
M 1300-100 A
| |
M 1300-100 A * |
| EN 10106:2015 |
M1300-100A |
| Former standard AISI |
|
| ASTM A677:2012 |
|
| JIS C 2552:2014 |
|
| IEC/CEI 60404-8-4:2013 |
M1300-100A 5 |
Prev grade
Next grade
Dimensions
Thickness 0.35 mm
Full table
| |
Notes |
Before side trimming |
Side trimmed |
Slit coils |
Sheet length 400 to 2500 mm |
| Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
| M 210-35 A |
1 & 3 |
- |
- |
600 |
1000 |
20 |
600 |
400 |
1100 |
| M 230-35 A AM FCE |
1 & 3 |
1200 |
| M 235-35 A |
1 & 3 |
| M 250-35 A |
1 & 3 |
1030 |
1230 |
1220 |
| M 270-35 A |
1 & 3 |
| M 300-35 A |
1 & 3 |
| M 330-35 A |
1 & 3 |
M 210-35 A
| Notes |
1 & 3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1000 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 230-35 A AM FCE
| Notes |
1 & 3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1200 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 235-35 A
| Notes |
1 & 3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1200 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 250-35 A
| Notes |
1 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1230 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 270-35 A
| Notes |
1 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1230 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 300-35 A
| Notes |
1 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1230 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 330-35 A
| Notes |
1 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1230 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
Prev grade
Next grade
Thickness 0.50 mm
Full table
| |
Notes |
Before side trimming |
Side trimmed |
Slit coils |
Sheet length 400 to 2500 mm |
| Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
| M 230-50 A |
3 |
- |
- |
600 |
1000 |
20 |
600 |
400 |
1100 |
| M 250-50 A |
3 |
1200 |
| M 270-50 A |
2 & 3 |
1030 |
1250 |
1220 |
| M 290-50 A |
2 & 3 |
| M 310-50 A |
2 & 3 |
| M 330-50 A |
2 & 3 |
| M 350-50 A |
2 & 3 |
| M 400-50 A |
2 & 3 |
| M 470-50 A |
2 & 3 |
| M 530-50 A |
2 & 3 |
| M 600-50 A |
2 & 3 |
| M 700-50 A |
2 & 3 |
| M 800-50 A |
2 & 3 |
| M 940-50 A |
2 & 3 |
M 230-50 A
| Notes |
3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1000 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 250-50 A
| Notes |
3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1200 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 270-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 290-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 310-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 330-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 350-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 400-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 470-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 530-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 600-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 700-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 800-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 940-50 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
Prev grade
Next grade
Thickness 0.65 mm
Full table
| |
Notes |
Before side trimming |
Side trimmed |
Slit coils |
Sheet length 400 to 2500 mm |
| Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
| M 290-65 A AM FCE |
3 |
- |
- |
600 |
1000 |
20 |
600 |
400 |
1100 |
| M 310-65 A |
3 |
1200 |
| M 330-65 A |
3 |
1030 |
1250 |
1220 |
| M 350-65 A |
2 & 3 |
| M 400-65 A |
2 & 3 |
| M 470-65 A |
2 & 3 |
| M 530-65 A |
2 & 3 |
| M 600-65 A |
2 & 3 |
| M 700-65 A |
2 & 3 |
| M 800-65 A |
2 & 3 |
| M 1000-65 A |
2 & 3 |
M 290-65 A AM FCE
| Notes |
3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1000 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 310-65 A
| Notes |
3 |
| Before side trimming |
Min width |
- |
| Max width |
- |
| Side trimmed |
Min width |
600 |
| Max width |
1200 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 330-65 A
| Notes |
3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 350-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 400-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 470-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 530-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 600-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 700-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 800-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 1000-65 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
Prev grade
Next grade
Thickness 1.00 mm
Full table
| |
Notes |
Before side trimming |
Side trimmed |
Slit coils |
Sheet length 400 to 2500 mm |
| Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
Min width |
Max width |
| M 600-100 A |
1, 2 & 3 |
1030 |
1250 |
600 |
1220 |
20 |
600 |
400 |
1100 |
| M 700-100 A |
1, 2 & 3 |
| M 800-100 A |
1, 2 & 3 |
| M 900-100 A AM FCE |
1, 2 & 3 |
| M 1000-100 A |
1, 2 & 3 |
| M 1300-100 A |
2 & 3 |
- |
- |
M 600-100 A
| Notes |
1, 2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 700-100 A
| Notes |
1, 2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 800-100 A
| Notes |
1, 2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 900-100 A AM FCE
| Notes |
1, 2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 1000-100 A
| Notes |
1, 2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
400 |
| Max width |
1100 |
M 1300-100 A
| Notes |
2 & 3 |
| Before side trimming |
Min width |
1030 |
| Max width |
1250 |
| Side trimmed |
Min width |
600 |
| Max width |
1220 |
| Slit coils |
Min width |
20 |
| Max width |
600 |
| Sheet length 400 to 2500 mm |
Min width |
- |
| Max width |
- |
Prev grade
Next grade
Magnetic properties
Thickness 0.35 mm
Full table
| |
Conventional density (kg/dm³) |
Max loss (W/kg) at 50 Hz at 1 T |
Max loss (W/kg) at 50 Hz at 1.5 T |
Max loss (W/kg) at 60 Hz at 1.5 T |
Min polarisation (T) at 2500 A/m |
| |
Indicative |
Guaranteed |
Indicative |
Guaranteed |
| M 210-35 A |
7.60 |
0.90 |
2.10 |
2.65 |
1.49 |
| M 230-35 A AM FCE |
0.95 |
2.30 |
2.90 |
| M 235-35 A |
2.35 |
2.97 |
| M 250-35 A |
1.00 |
2.50 |
3.14 |
| M 270-35 A |
7.65 |
1.10 |
2.70 |
3.36 |
| M 300-35 A |
1.20 |
3.00 |
3.74 |
| M 330-35 A |
1.30 |
3.30 |
4.12 |
| |
Min polarisation (T) at 5000 A/m |
Min polarisation (T) at 10,000 A/m |
Max anisotropy of loss (+/-%) |
Min number of bends |
Min stacking factor (mm) |
| Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
| M 210-35 A |
1.60 |
1.70 |
17 |
2 |
0.95 |
| M 230-35 A AM FCE |
| M 235-35 A |
| M 250-35 A |
| M 270-35 A |
| M 300-35 A |
3 |
| M 330-35 A |
M 210-35 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
0.90 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.10 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
2.65 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
M 230-35 A AM FCE
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
0.95 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
2.90 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
M 235-35 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
0.95 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.35 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
2.97 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
M 250-35 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.50 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.14 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
M 270-35 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.10 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.70 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.36 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
M 300-35 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.20 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.74 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
3 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
M 330-35 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.30 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
4.12 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
3 |
| Min stacking factor (mm) |
Guaranteed |
0.95 |
Prev grade
Next grade
Thickness 0.50 mm
Full table
| |
Conventional density (kg/dm³) |
Max loss (W/kg) at 50 Hz at 1 T |
Max loss (W/kg) at 50 Hz at 1.5 T |
Max loss (W/kg) at 60 Hz at 1.5 T |
Min polarisation (T) at 2500 A/m |
| |
Indicative |
Guaranteed |
Indicative |
Guaranteed |
| M 230-50 A |
7.60 |
1.00 |
2.30 |
2.95 |
1.49 |
| M 250-50 A |
1.05 |
2.50 |
3.21 |
| M 270-50 A |
1.10 |
2.70 |
3.47 |
| M 290-50 A |
1.15 |
2.90 |
3.71 |
| M 310-50 A |
7.65 |
1.25 |
3.10 |
3.95 |
| M 330-50 A |
1.35 |
3.30 |
4.20 |
| M 350-50 A |
1.50 |
3.50 |
4.45 |
1.50 |
| M 400-50 A |
7.70 |
1.70 |
4.00 |
5.10 |
1.53 |
| M 470-50 A |
2.00 |
4.70 |
5.90 |
1.54 |
| M 530-50 A |
2.30 |
5.30 |
6.66 |
1.56 |
| M 600-50 A |
7.75 |
2.60 |
6.00 |
7.53 |
1.57 |
| M 700-50 A |
7.80 |
3.00 |
7.00 |
8.79 |
1.60 |
| M 800-50 A |
3.60 |
8.00 |
10.06 |
| M 940-50 A |
7.85 |
4.20 |
9.40 |
11.84 |
1.62 |
| |
Min polarisation (T) at 5000 A/m |
Min polarisation (T) at 10,000 A/m |
Max anisotropy of loss (+/-%) |
Min number of bends |
Min stacking factor (mm) |
| Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
| M 230-50 A |
1.60 |
1.70 |
17 |
2 |
0.96 |
| M 250-50 A |
| M 270-50 A |
| M 290-50 A |
| M 310-50 A |
14 |
3 |
| M 330-50 A |
| M 350-50 A |
12 |
5 |
| M 400-50 A |
1.63 |
1.73 |
| M 470-50 A |
1.64 |
1.74 |
10 |
10 |
| M 530-50 A |
1.65 |
1.75 |
| M 600-50 A |
1.66 |
1.76 |
| M 700-50 A |
1.69 |
1.77 |
| M 800-50 A |
1.70 |
1.78 |
| M 940-50 A |
1.72 |
1.81 |
8 |
M 230-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
2.95 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 250-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.05 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.50 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.21 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 270-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.10 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.70 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.47 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 290-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.15 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.90 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.71 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
17 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 310-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.25 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.10 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.95 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
14 |
| Min number of bends |
Guaranteed |
3 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 330-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.35 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
4.20 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
14 |
| Min number of bends |
Guaranteed |
3 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 350-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.50 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.50 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
4.45 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.50 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
12 |
| Min number of bends |
Guaranteed |
5 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 400-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.70 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.70 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
4.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
5.10 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.53 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.63 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.73 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
12 |
| Min number of bends |
Guaranteed |
5 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 470-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.70 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
4.70 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
5.90 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.54 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.64 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.74 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 530-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.70 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.30 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
5.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
6.66 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.56 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.65 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.75 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 600-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.75 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.60 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
6.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
7.53 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.57 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.66 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.76 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 700-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.80 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
3.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
7.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
8.79 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.69 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.77 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 800-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.80 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
3.60 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
8.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
10.06 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.70 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.78 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
M 940-50 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.85 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
4.20 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
9.40 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
11.84 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.62 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.72 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.81 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
8 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.96 |
Prev grade
Next grade
Thickness 0.65 mm
Full table
| |
Conventional density (kg/dm³) |
Max loss (W/kg) at 50 Hz at 1 T |
Max loss (W/kg) at 60 Hz at 1.5 T |
Min polarisation (T) at 2500 A/m |
| |
Indicative |
Indicative |
Guaranteed |
| M 290-65 A AM FCE |
7.60 |
1.25 |
3.85 |
1.49 |
| M 310-65 A |
4.08 |
| M 330-65 A |
1.35 |
4.30 |
| M 350-65 A |
1.50 |
4.57 |
| M 400-65 A |
7.65 |
1.70 |
5.20 |
1.52 |
| M 470-65 A |
2.00 |
6.13 |
1.53 |
| M 530-65 A |
7.70 |
2.30 |
6.84 |
1.54 |
| M 600-65 A |
7.75 |
2.60 |
7.71 |
1.56 |
| M 700-65 A |
3.00 |
8.98 |
1.57 |
| M 800-65 A |
7.80 |
3.60 |
10.26 |
1.60 |
| M 1000-65 A |
4.40 |
12.77 |
1.61 |
| |
Min polarisation (T) at 5000 A/m |
Min polarisation (T) at 10,000 A/m |
Max anisotropy of loss (+/-%) |
Min number of bends |
Min stacking factor (mm) |
| Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
| M 290-65 A AM FCE |
1.60 |
1.70 |
15 |
2 |
0.97 |
| M 310-65 A |
| M 330-65 A |
| M 350-65 A |
14 |
| M 400-65 A |
1.62 |
1.72 |
| M 470-65 A |
1.63 |
1.73 |
12 |
5 |
| M 530-65 A |
1.64 |
1.74 |
| M 600-65 A |
1.66 |
1.76 |
10 |
10 |
| M 700-65 A |
1.67 |
| M 800-65 A |
1.70 |
1.78 |
| M 1000-65 A |
1.71 |
1.80 |
M 290-65 A AM FCE
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.25 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
2.90 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
3.85 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
15 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 310-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.25 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.10 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
4.08 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
15 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 330-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.35 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
4.30 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
15 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 350-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.50 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
3.50 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
4.57 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.49 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.70 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
14 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 400-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
1.70 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
4.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
5.20 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.52 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.62 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.72 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
14 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 470-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
4.70 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
6.13 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.53 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.63 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.73 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
12 |
| Min number of bends |
Guaranteed |
5 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 530-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.70 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.30 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
5.30 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
6.84 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.54 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.64 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.74 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
12 |
| Min number of bends |
Guaranteed |
5 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 600-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.75 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.60 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
6.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
7.71 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.56 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.66 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.76 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 700-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.75 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
3.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
7.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
8.98 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.57 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.67 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.76 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 800-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.80 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
3.60 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
8.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
10.26 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.70 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.78 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
M 1000-65 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.80 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
4.40 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
10.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
12.77 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.61 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.71 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.80 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.97 |
Prev grade
Next grade
Thickness 1.00 mm
Full table
| |
Conventional density (kg/dm³) |
Max loss (W/kg) at 50 Hz at 1 T |
Max loss (W/kg) at 50 Hz at 1.5 T |
Max loss (W/kg) at 60 Hz at 1.5 T |
Min polarisation (T) at 2500 A/m |
| |
Indicative |
Guaranteed |
Indicative |
Guaranteed |
| M 600-100 A |
7.60 |
2.60 |
6.00 |
8.14 |
1.53 |
| M 700-100 A |
7.65 |
3.00 |
7.00 |
9.38 |
1.54 |
| M 800-100 A |
7.70 |
3.60 |
8.00 |
10.70 |
1.56 |
| M 900-100 A AM FCE |
4.00 |
9.00 |
12.05 |
| M 1000-100 A |
7.80 |
4.40 |
10.00 |
13.39 |
1.58 |
| M 1300-100 A |
5.80 |
13.00 |
17.34 |
1.60 |
| |
Min polarisation (T) at 5000 A/m |
Min polarisation (T) at 10,000 A/m |
Max anisotropy of loss (+/-%) |
Min number of bends |
Min stacking factor (mm) |
| Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
Guaranteed |
| M 600-100 A |
1.63 |
1.72 |
10 |
2 |
0.98 |
| M 700-100 A |
1.64 |
1.73 |
8 |
3 |
| M 800-100 A |
1.66 |
1.75 |
6 |
5 |
| M 900-100 A AM FCE |
| M 1000-100 A |
1.68 |
1.76 |
10 |
| M 1300-100 A |
1.70 |
1.78 |
M 600-100 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.60 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
2.60 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
6.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
8.14 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.53 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.63 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.72 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
10 |
| Min number of bends |
Guaranteed |
2 |
| Min stacking factor (mm) |
Guaranteed |
0.98 |
M 700-100 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.65 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
3.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
7.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
9.38 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.54 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.64 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.73 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
8 |
| Min number of bends |
Guaranteed |
3 |
| Min stacking factor (mm) |
Guaranteed |
0.98 |
M 800-100 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.70 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
3.60 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
8.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
10.70 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.56 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.66 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.75 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
6 |
| Min number of bends |
Guaranteed |
5 |
| Min stacking factor (mm) |
Guaranteed |
0.98 |
M 900-100 A AM FCE
| |
|
|
| Conventional density (kg/dm³) |
|
7.70 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
4.00 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
9.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
12.05 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.56 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.66 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.75 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
6 |
| Min number of bends |
Guaranteed |
5 |
| Min stacking factor (mm) |
Guaranteed |
0.98 |
M 1000-100 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.80 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
4.40 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
10.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
13.39 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.58 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.68 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.76 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
6 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.98 |
M 1300-100 A
| |
|
|
| Conventional density (kg/dm³) |
|
7.80 |
| Max loss (W/kg) at 50 Hz at 1 T |
Indicative |
5.80 |
| Max loss (W/kg) at 50 Hz at 1.5 T |
Guaranteed |
13.00 |
| Max loss (W/kg) at 60 Hz at 1.5 T |
Indicative |
17.34 |
| Min polarisation (T) at 2500 A/m |
Guaranteed |
1.60 |
| Min polarisation (T) at 5000 A/m |
Guaranteed |
1.70 |
| Min polarisation (T) at 10,000 A/m |
Guaranteed |
1.78 |
| Max anisotropy of loss (+/-%) |
Guaranteed |
6 |
| Min number of bends |
Guaranteed |
10 |
| Min stacking factor (mm) |
Guaranteed |
0.98 |
Prev grade
Next grade
Mechanical properties
The mechanical properties are for information purposes only.
Thickness 0.35 mm
Full table
| |
Direction |
Re (MPa) |
Rm (MPa) |
A80 (%) |
HV |
Re/Rm |
| M 210-35 A |
T |
410 - 460 |
530 - 580 |
12 - 22 |
210 - 240 |
0.76 - 0.81 |
| M 230-35 A AM FCE |
T |
410 - 460 |
530 - 580 |
12 - 22 |
210 - 240 |
0.76 - 0.81 |
| M 235-35 A |
T |
410 - 460 |
530 - 580 |
12 - 22 |
210 - 240 |
0.76 - 0.81 |
| M 250-35 A |
T |
410 - 460 |
530 - 580 |
12 - 22 |
210 - 240 |
0.76 - 0.81 |
| M 270-35 A |
T |
400 - 450 |
520 - 570 |
15 - 25 |
195 - 225 |
0.76 - 0.81 |
| M 300-35 A |
T |
400 - 450 |
520 - 570 |
15 - 25 |
195 - 225 |
0.76 - 0.81 |
| M 330-35 A |
T |
370 - 420 |
510 - 550 |
20 - 30 |
165 - 195 |
0.72 - 0.77 |
M 210-35 A
| |
Direction |
M 210-35 A |
| Re (MPa) |
T |
410 - 460 |
| Rm (MPa) |
T |
530 - 580 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.76 - 0.81 |
M 230-35 A AM FCE
| |
Direction |
M 230-35 A AM FCE |
| Re (MPa) |
T |
410 - 460 |
| Rm (MPa) |
T |
530 - 580 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.76 - 0.81 |
M 235-35 A
| |
Direction |
M 235-35 A |
| Re (MPa) |
T |
410 - 460 |
| Rm (MPa) |
T |
530 - 580 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.76 - 0.81 |
M 250-35 A
| |
Direction |
M 250-35 A |
| Re (MPa) |
T |
410 - 460 |
| Rm (MPa) |
T |
530 - 580 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.76 - 0.81 |
M 270-35 A
| |
Direction |
M 270-35 A |
| Re (MPa) |
T |
400 - 450 |
| Rm (MPa) |
T |
520 - 570 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
195 - 225 |
| Re/Rm |
T |
0.76 - 0.81 |
M 300-35 A
| |
Direction |
M 300-35 A |
| Re (MPa) |
T |
400 - 450 |
| Rm (MPa) |
T |
520 - 570 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
195 - 225 |
| Re/Rm |
T |
0.76 - 0.81 |
M 330-35 A
| |
Direction |
M 330-35 A |
| Re (MPa) |
T |
370 - 420 |
| Rm (MPa) |
T |
510 - 550 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
165 - 195 |
| Re/Rm |
T |
0.72 - 0.77 |
Prev grade
Next grade
Thickness 0.50 mm
Full table
| |
Direction |
Re (MPa) |
Rm (MPa) |
A80 (%) |
HV |
Re/Rm |
| M 230-50 A |
T |
425 - 475 |
550 - 600 |
12 - 22 |
210 - 240 |
0.75 - 0.80 |
| M 250-50 A |
T |
425 - 475 |
550 - 600 |
12 - 22 |
210 - 240 |
0.75 - 0.80 |
| M 270-50 A |
T |
420 - 470 |
540 - 590 |
15 - 25 |
200 - 230 |
0.75 - 0.80 |
| M 290-50 A |
T |
420 - 470 |
540 - 590 |
15 - 25 |
200 - 230 |
0.73 - 0.78 |
| M 310-50 A |
T |
400 - 450 |
530 - 580 |
20 - 30 |
200 - 230 |
0.73 - 0.78 |
| M 330-50 A |
T |
365 - 415 |
510 - 560 |
20 - 30 |
180 - 210 |
0.72 - 0.77 |
| M 350-50 A |
T |
365 - 415 |
500 - 560 |
20 - 30 |
180 - 210 |
0.72 - 0.77 |
| M 400-50 A |
T |
340 - 390 |
480 - 530 |
25 - 35 |
170 - 200 |
0.69 - 0.74 |
| M 470-50 A |
T |
270 - 320 |
410 - 460 |
28 - 38 |
140 - 170 |
0.62 - 0.67 |
| M 530-50 A |
T |
270 - 320 |
410 - 460 |
28 - 38 |
140 - 170 |
0.62 - 0.67 |
| M 600-50 A |
T |
260 - 310 |
390 - 440 |
30 - 40 |
120 - 150 |
0.64 - 0.69 |
| M 700-50 A |
T |
260 - 310 |
390 - 440 |
30 - 40 |
120 - 150 |
0.64 - 0.69 |
| M 800-50 A |
T |
290 - 350 |
420 - 460 |
27 - 37 |
120 - 150 |
0.69 - 0.74 |
| M 940-50 A |
T |
290 - 350 |
420 - 460 |
27 - 37 |
120 - 150 |
0.69 - 0.74 |
M 230-50 A
| |
Direction |
M 230-50 A |
| Re (MPa) |
T |
425 - 475 |
| Rm (MPa) |
T |
550 - 600 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.75 - 0.80 |
M 250-50 A
| |
Direction |
M 250-50 A |
| Re (MPa) |
T |
425 - 475 |
| Rm (MPa) |
T |
550 - 600 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.75 - 0.80 |
M 270-50 A
| |
Direction |
M 270-50 A |
| Re (MPa) |
T |
420 - 470 |
| Rm (MPa) |
T |
540 - 590 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
200 - 230 |
| Re/Rm |
T |
0.75 - 0.80 |
M 290-50 A
| |
Direction |
M 290-50 A |
| Re (MPa) |
T |
420 - 470 |
| Rm (MPa) |
T |
540 - 590 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
200 - 230 |
| Re/Rm |
T |
0.73 - 0.78 |
M 310-50 A
| |
Direction |
M 310-50 A |
| Re (MPa) |
T |
400 - 450 |
| Rm (MPa) |
T |
530 - 580 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
200 - 230 |
| Re/Rm |
T |
0.73 - 0.78 |
M 330-50 A
| |
Direction |
M 330-50 A |
| Re (MPa) |
T |
365 - 415 |
| Rm (MPa) |
T |
510 - 560 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
180 - 210 |
| Re/Rm |
T |
0.72 - 0.77 |
M 350-50 A
| |
Direction |
M 350-50 A |
| Re (MPa) |
T |
365 - 415 |
| Rm (MPa) |
T |
500 - 560 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
180 - 210 |
| Re/Rm |
T |
0.72 - 0.77 |
M 400-50 A
| |
Direction |
M 400-50 A |
| Re (MPa) |
T |
340 - 390 |
| Rm (MPa) |
T |
480 - 530 |
| A80 (%) |
T |
25 - 35 |
| HV |
T |
170 - 200 |
| Re/Rm |
T |
0.69 - 0.74 |
M 470-50 A
| |
Direction |
M 470-50 A |
| Re (MPa) |
T |
270 - 320 |
| Rm (MPa) |
T |
410 - 460 |
| A80 (%) |
T |
28 - 38 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.62 - 0.67 |
M 530-50 A
| |
Direction |
M 530-50 A |
| Re (MPa) |
T |
270 - 320 |
| Rm (MPa) |
T |
410 - 460 |
| A80 (%) |
T |
28 - 38 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.62 - 0.67 |
M 600-50 A
| |
Direction |
M 600-50 A |
| Re (MPa) |
T |
260 - 310 |
| Rm (MPa) |
T |
390 - 440 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.64 - 0.69 |
M 700-50 A
| |
Direction |
M 700-50 A |
| Re (MPa) |
T |
260 - 310 |
| Rm (MPa) |
T |
390 - 440 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.64 - 0.69 |
M 800-50 A
| |
Direction |
M 800-50 A |
| Re (MPa) |
T |
290 - 350 |
| Rm (MPa) |
T |
420 - 460 |
| A80 (%) |
T |
27 - 37 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.69 - 0.74 |
M 940-50 A
| |
Direction |
M 940-50 A |
| Re (MPa) |
T |
290 - 350 |
| Rm (MPa) |
T |
420 - 460 |
| A80 (%) |
T |
27 - 37 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.69 - 0.74 |
Prev grade
Next grade
Thickness 0.65 mm
Full table
| |
Direction |
Re (MPa) |
Rm (MPa) |
A80 (%) |
HV |
Re/Rm |
| M 290-65 A AM FCE |
T |
430 - 480 |
550 - 600 |
12 - 22 |
210 - 240 |
0.78 - 0.82 |
| M 310-65 A |
T |
430 - 480 |
550 - 600 |
15 - 25 |
210 - 240 |
0.78 - 0.82 |
| M 330-65 A |
T |
430 - 480 |
550 - 620 |
15 - 25 |
210 - 240 |
0.78 - 0.82 |
| M 350-65 A |
T |
420 - 470 |
550 - 600 |
15 - 25 |
200 - 230 |
0.75 - 0.80 |
| M 400-65 A |
T |
370 - 420 |
520 - 570 |
20 - 30 |
200 - 230 |
0.71 - 0.76 |
| M 470-65 A |
T |
370 - 420 |
520 - 570 |
20 - 30 |
160 - 190 |
0.71 - 0.76 |
| M 530-65 A |
T |
270 - 320 |
420 - 470 |
30 - 40 |
140 - 170 |
0.65 - 0.70 |
| M 600-65 A |
T |
270 - 320 |
420 - 470 |
30 - 40 |
140 - 170 |
0.65 - 0.70 |
| M 700-65 A |
T |
280 - 330 |
420 - 470 |
30 - 40 |
130 - 160 |
0.67 - 0.72 |
| M 800-65 A |
T |
300 - 350 |
430 - 480 |
27 - 37 |
130 - 160 |
0.70 - 0.75 |
| M 1000-65 A |
T |
300 - 350 |
430 - 480 |
27 - 37 |
120 - 150 |
0.70 - 0.75 |
M 290-65 A AM FCE
| |
Direction |
M 290-65 A AM FCE |
| Re (MPa) |
T |
430 - 480 |
| Rm (MPa) |
T |
550 - 600 |
| A80 (%) |
T |
12 - 22 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.78 - 0.82 |
M 310-65 A
| |
Direction |
M 310-65 A |
| Re (MPa) |
T |
430 - 480 |
| Rm (MPa) |
T |
550 - 600 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.78 - 0.82 |
M 330-65 A
| |
Direction |
M 330-65 A |
| Re (MPa) |
T |
430 - 480 |
| Rm (MPa) |
T |
550 - 620 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
210 - 240 |
| Re/Rm |
T |
0.78 - 0.82 |
M 350-65 A
| |
Direction |
M 350-65 A |
| Re (MPa) |
T |
420 - 470 |
| Rm (MPa) |
T |
550 - 600 |
| A80 (%) |
T |
15 - 25 |
| HV |
T |
200 - 230 |
| Re/Rm |
T |
0.75 - 0.80 |
M 400-65 A
| |
Direction |
M 400-65 A |
| Re (MPa) |
T |
370 - 420 |
| Rm (MPa) |
T |
520 - 570 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
200 - 230 |
| Re/Rm |
T |
0.71 - 0.76 |
M 470-65 A
| |
Direction |
M 470-65 A |
| Re (MPa) |
T |
370 - 420 |
| Rm (MPa) |
T |
520 - 570 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
160 - 190 |
| Re/Rm |
T |
0.71 - 0.76 |
M 530-65 A
| |
Direction |
M 530-65 A |
| Re (MPa) |
T |
270 - 320 |
| Rm (MPa) |
T |
420 - 470 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.65 - 0.70 |
M 600-65 A
| |
Direction |
M 600-65 A |
| Re (MPa) |
T |
270 - 320 |
| Rm (MPa) |
T |
420 - 470 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.65 - 0.70 |
M 700-65 A
| |
Direction |
M 700-65 A |
| Re (MPa) |
T |
280 - 330 |
| Rm (MPa) |
T |
420 - 470 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
130 - 160 |
| Re/Rm |
T |
0.67 - 0.72 |
M 800-65 A
| |
Direction |
M 800-65 A |
| Re (MPa) |
T |
300 - 350 |
| Rm (MPa) |
T |
430 - 480 |
| A80 (%) |
T |
27 - 37 |
| HV |
T |
130 - 160 |
| Re/Rm |
T |
0.70 - 0.75 |
M 1000-65 A
| |
Direction |
M 1000-65 A |
| Re (MPa) |
T |
300 - 350 |
| Rm (MPa) |
T |
430 - 480 |
| A80 (%) |
T |
27 - 37 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.70 - 0.75 |
Prev grade
Next grade
Thickness 1.00 mm
Full table
| |
Direction |
Re (MPa) |
Rm (MPa) |
A80 (%) |
HV |
Re/Rm |
| M 600-100 A |
T |
370 - 420 |
520 - 570 |
20 - 30 |
170 - 200 |
0.71 - 0.76 |
| M 700-100 A |
T |
290 - 340 |
450 - 490 |
30 - 40 |
140 - 170 |
0.66 - 0.71 |
| M 800-100 A |
T |
290 - 340 |
450 - 490 |
30 - 40 |
140 - 170 |
0.66 - 0.71 |
| M 900-100 A AM FCE |
T |
290 - 340 |
450 - 490 |
30 - 40 |
140 - 170 |
0.66 - 0.71 |
| M 1000-100 A |
T |
260 - 300 |
390 - 430 |
30 - 40 |
120 - 150 |
0.66 - 0.71 |
| M 1300-100 A |
T |
260 - 300 |
390 - 430 |
30 - 40 |
120 - 150 |
0.66 - 0.71 |
M 600-100 A
| |
Direction |
M 600-100 A |
| Re (MPa) |
T |
370 - 420 |
| Rm (MPa) |
T |
520 - 570 |
| A80 (%) |
T |
20 - 30 |
| HV |
T |
170 - 200 |
| Re/Rm |
T |
0.71 - 0.76 |
M 700-100 A
| |
Direction |
M 700-100 A |
| Re (MPa) |
T |
290 - 340 |
| Rm (MPa) |
T |
450 - 490 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.66 - 0.71 |
M 800-100 A
| |
Direction |
M 800-100 A |
| Re (MPa) |
T |
290 - 340 |
| Rm (MPa) |
T |
450 - 490 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.66 - 0.71 |
M 900-100 A AM FCE
| |
Direction |
M 900-100 A AM FCE |
| Re (MPa) |
T |
290 - 340 |
| Rm (MPa) |
T |
450 - 490 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
140 - 170 |
| Re/Rm |
T |
0.66 - 0.71 |
M 1000-100 A
| |
Direction |
M 1000-100 A |
| Re (MPa) |
T |
260 - 300 |
| Rm (MPa) |
T |
390 - 430 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.66 - 0.71 |
M 1300-100 A
| |
Direction |
M 1300-100 A |
| Re (MPa) |
T |
260 - 300 |
| Rm (MPa) |
T |
390 - 430 |
| A80 (%) |
T |
30 - 40 |
| HV |
T |
120 - 150 |
| Re/Rm |
T |
0.66 - 0.71 |
Prev grade
Next grade
Coating properties
These standard grades are available non-insulated or varnished with any of the coating types described in data sheet D28.
All details provided in the ArcelorMittal Flat Carbon Europe S.A. catalogue are for information purposes only. ArcelorMittal Flat Carbon Europe S.A. reserves the right to change its product range at any time without prior notice.
For more information on our products, visit the document centre.
